Connected type, Pitch=1.27mm

• When long connected type is used, it may happen to bend on reflow. Use of glue to prevent from bending is recommendable.
• Use of glue between PC board and resin part is also recommendable.
• Contact Resistance....10m ohm or less
• Dielectric Strength....500V AC, DC 1min
• Finish....Au plating over Ni
• Insulation Resistance....500M ohm or more
• Material....
  Socket part..Beryllium copper
  Resin part..PCT black (UL94V-0)
• Mating/unmating (times)....100 times or more
• Mating/unmating Forces....30g or more
• Rated Current....1A
• Rated Voltage....125V AC, DC
• Recommended Male Pin Diameter (phi mm)....0.3 to 0.45
• Temperature Range (Degree Celsius)....-40 to +125